66
questions
66
from past papers
45 min
chapter test
Lesson · 20 minRaoult's law and colligative propertiesMolality and mole fraction, vapour pressure of mixtures, positive and negative deviations, and how dissolved particles shift freezing and boiling points.

Questions with solutions

Question 1NEET 2026, Q76

Identify the correct statements: A. The molality of 2.5 g of ethanoic acid (Molar mass: 60 g mol−1) in 75 g of benzene solution is 0.556 m. B. The molarity of a solution containing 5 g of NaOH (molar mass: 40 g mol−1) in 450 mL of solution is 0.278 M at 298 K. C. Aquatic species are more comfortable in cold water. D. The solubility of gas increases with decrease in pressure. E. For a binary mixture of A and B, the number of moles of A and B are nA and nB respectively. The mole fraction of B will be xB=nAnA+nB. Choose the correct answer from the options given below:

  1. 1A and C only
  2. 2A, B and C only
  3. 3A, D and E only
  4. 4A and B only
Show answer and solution

Correct: option 2, A, B and C only

A: (2.5/60)/0.075 kg=0.556 m, correct. B: (5/40)/0.450 L=0.278 M, correct. C: gases dissolve better at lower temperature, so cold water holds more oxygen, correct. D is wrong because solubility of a gas rises with pressure (Henry's law). E is wrong because xB=nB/(nA+nB).

Question 2NEET 2026, Q77

Mixture of chloroform and acetone forms a solution with negative deviation from Raoult's law due to:

  1. 1formation of hydrogen bonding between acetone and chloroform.
  2. 2increase in escaping tendency of molecules of each component.
  3. 3stronger intermolecular forces between chloroform molecules than those between chloroform and acetone molecules.
  4. 4repulsive forces.
Show answer and solution

Correct: option 1, formation of hydrogen bonding between acetone and chloroform.

The hydrogen of chloroform forms a hydrogen bond with the carbonyl oxygen of acetone. This new attraction lowers the escaping tendency of both kinds of molecules, so the vapour pressure is lower than Raoult's law predicts.

Question 3NEET 2026 Re-exam, Q54

Assertion A: For an ideal solution formed by mixing liquids P and Q, ΔmixH=0 and ΔmixV=0 Reason R: No interactions occur between P and Q In the light of the above statements, choose the most appropriate answer from the options given below.

  1. 1Both A and R are correct and R is the correct explanation of A
  2. 2Both A and R are correct but R is NOT the correct explanation of A
  3. 3A is correct but R is not correct
  4. 4A is not correct but R is correct
Show answer and solution

Correct: option 3, A is correct but R is not correct

For an ideal solution the enthalpy of mixing and the volume change on mixing are both zero, so A is correct. This is because the P-Q interactions are nearly the same as the P-P and Q-Q interactions, not because there are no interactions between P and Q, so R is not correct.

Question 4NEET 2026 Re-exam, Q71

Consider the following statements about the solutions formed by mixing two liquids. A. An ideal solution thus formed obeys Raoult's law throughout the composition range. B. Mixture of chloroform and acetone shows negative deviation from Raoult's law. C. Mixture of aniline and phenol shows positive deviation from Raoult's law.

  1. 1A and B only
  2. 2B and C only
  3. 3A only
  4. 4A and C only
Show answer and solution

Correct: option 1, A and B only

A is the definition of an ideal solution. Chloroform and acetone form a hydrogen bond with each other, which lowers the escaping tendency, so B (negative deviation) is correct. Aniline and phenol also attract each other through hydrogen bonding between the phenolic hydrogen and the nitrogen of aniline, so they too show negative, not positive, deviation; C is wrong.

Question 5NEET 2025, Q66

Match List - I with List - II

List-I (Example)List-II (Type of Solution)
A. HumidityI. Solid in solid
B. AlloysII. Liquid in gas
C. AmalgamsIII. Solid in gas
D. SmokeIV. Liquid in solid

Choose the correct answer from the options given below:

  1. 1A-II, B-IV, C-I, D-III
  2. 2A-II, B-I, C-IV, D-III
  3. 3A-III, B-I, C-IV, D-II
  4. 4A-III, B-II, C-I, D-IV
Show answer and solution

Correct: option 2, A-II, B-I, C-IV, D-III

Humidity is water (liquid) in air (II). Alloys are a solid dissolved in a solid (I). Amalgams are mercury, a liquid, in a solid metal (IV). Smoke is solid particles in a gas (III). So A-II, B-I, C-IV, D-III, option (2).

Question 6NEET 2025, Q79

Which of the following aqueous solution will exhibit highest boiling point?

  1. 10.01M Urea
  2. 20.01M KNO3
  3. 30.01M Na2SO4
  4. 40.015M C6H12O6
Show answer and solution

Correct: option 3, 0.01M Na2SO4

Elevation of boiling point depends on the total concentration of solute particles, i× concentration. Urea: 0.01; KNO3 (i=2): 0.02; Na2SO4 (i=3): 0.03; glucose: 0.015. Na2SO4 gives the most particles and so the highest boiling point, option (3).

Question 7NEET 2025, Q81

5 moles of liquid X and 10 moles of liquid Y make a solution having a vapour pressure of 70 torr. The vapour pressures of pure X and Y are 63 torr and 78 torr respectively. Which of the following is true regarding the described solution?

  1. 1The solution shows positive deviation.
  2. 2The solution shows negative deviation.
  3. 3The solution is ideal.
  4. 4The solution has volume greater than the sum of individual volumes.
Show answer and solution

Correct: option 2, The solution shows negative deviation.

Mole fractions: xX=515=13, xY=23. Raoult's law gives P=13(63)+23(78)=21+52=73 torr. The observed 70 torr is lower than this, so the solution shows negative deviation, option (2).

Question 8NEET 2024, Q72

The Henry's law constant (KH) values of three gases (A, B, C) in water are 145, 2×10−5 and 35 kbar, respectively. The solubility of these gases in water follow the order:

  1. 1A > B > C
  2. 2B > A > C
  3. 3B > C > A
  4. 4A > C > B
Show answer and solution

Correct: option 3, B > C > A

Henry's law is p=KH x, so at the same pressure the mole fraction dissolved is x=p/KH: the smaller the KH, the more soluble the gas. KH increases in the order B (2×10−5) < C (35) < A (145), so solubility decreases in the order B > C > A. That is option (3).

Question 9NEET 2024, Q96

The plot of osmotic pressure (Π) vs concentration (mol L−1) for a solution gives a straight line with slope 25.73 L bar mol−1. The temperature at which the osmotic pressure measurement is done is: (Use R=0.083 L bar mol−1 K−1)

  1. 112.05°C
  2. 237°C
  3. 3310°C
  4. 425.73°C
Show answer and solution

Correct: option 2, 37°C

Osmotic pressure is Π=CRT, so a plot of Π against C is a straight line of slope RT. Then T=25.730.083=310 K, which is 310−273=37°C. That is option (2).

Question 10NEET 2024 Re-exam, Q62

Arrange the following compounds in increasing order of their solubilities in chloroform: NaCl, CH3OH, cyclohexane, CH3CN

  1. 1NaCl<CH3CN<CH3OH<Cyclohexane
  2. 2CH3OH<CH3CN<NaCl<Cyclohexane
  3. 3NaCl<CH3OH<CH3CN<Cyclohexane
  4. 4Cyclohexane<CH3CN<CH3OH<NaCl
Show answer and solution

Correct: option 3, NaCl<CH3OH<CH3CN<Cyclohexane

Like dissolves like, and chloroform is a weakly polar solvent that cannot easily break up an ionic lattice or a hydrogen-bonded liquid. Ionic NaCl is therefore the least soluble and non-polar cyclohexane the most. Between the two polar liquids, methanol molecules are held to each other by hydrogen bonds, while acetonitrile has only dipole-dipole attractions, so methanol comes below acetonitrile: NaCl<CH3OH<CH3CN<cyclohexane.

Question 11NEET 2024 Re-exam, Q70

The amount of glucose required to prepare 250 mL of M20 aqueous solution is: (Molar mass of glucose: 180 g mol−1)

  1. 12.25 g
  2. 24.5 g
  3. 30.44 g
  4. 41.125 g
Show answer and solution

Correct: option 1, 2.25 g

Moles needed = molarity × volume in litres =120×0.250=0.0125 mol. Mass =0.0125×180=2.25 g.

Question 12NEET 2024 Re-exam, Q98

Mass of glucose (C6H12O6) required to be dissolved to prepare one litre of its solution which is isotonic with 15 g L−1 solution of urea (NH3CONH2) is (Given: Molar mass in g mol−1 C: 12, H: 1, O: 16, N: 14)

  1. 155 g
  2. 215 g
  3. 330 g
  4. 445 g
Show answer and solution

Correct: option 4, 45 g

Isotonic solutions have the same osmotic pressure, and for non-electrolytes at the same temperature that means the same molar concentration. Urea (NH2CONH2, molar mass 60) at 15 g per litre is 15/60=0.25 M. Glucose (molar mass 180) must also be 0.25 M, so the mass needed in one litre is 0.25×180=45 g.

Question 13NEET 2023 Manipur, Q68

The density of 1 M solution of a compound ‘X’ is 1.25 g mL−1. The correct option for the molality of solution is (Molar mass of compound X = 85 g)

  1. 11.165 m
  2. 20.858 m
  3. 30.705 m
  4. 41.208 m
Show answer and solution

Correct: option 2, 0.858 m

One litre of solution weighs 1000×1.25=1250 g and contains 1 mol, that is 85 g, of X. The solvent is therefore 1250−85=1165 g =1.165 kg. Molality =11.165=0.858 m.

Question 14NEET 2023 Manipur, Q97

Which amongst the following aqueous solutions of electrolytes will have minimum elevation in boiling point? Choose the correct option.

  1. 10.1 M MgSO4
  2. 21 M NaCl
  3. 30.05 M NaCl
  4. 40.1 M KCl
Show answer and solution

Correct: option 3, 0.05 M NaCl

Elevation in boiling point is a colligative property, proportional to the concentration of particles, i×C. Each of these salts gives two ions, so iC is 0.2 for 0.1 M MgSO4, 2 for 1 M NaCl, 0.1 for 0.05 M NaCl and 0.2 for 0.1 M KCl. The smallest value, and so the smallest elevation, is for 0.05 M NaCl.

Question 15NEET 2022, Q83

In one molal solution that contains 0.5 mole of a solute, there is

  1. 11000 g of solvent
  2. 2500 mL of solvent
  3. 3500 g of solvent
  4. 4100 mL of solvent
Show answer and solution

Correct: option 3, 500 g of solvent

Molality is moles of solute per kilogram of solvent. One molal means 1 mole in 1000 g of solvent, so 0.5 mole is dissolved in 500 g of solvent.

Question 16NEET 2022 Re-exam, Q77

KH value for some gases at the same temperature 'T' are given:

GasKH/k bar
Ar40.3
CO21.67
HCHO1.83×10−5
CH40.413

where KH is Henry's Law constant in water. The order of their solubility in water is:

  1. 1HCHO<CH4<CO2<Ar
  2. 2Ar<CO2<CH4<HCHO
  3. 3Ar<CH4<CO2<HCHO
  4. 4HCHO<CO2<CH4<Ar
Show answer and solution

Correct: option 2, Ar<CO2<CH4<HCHO

Henry's law is p=KHx, so at the same pressure the mole fraction dissolved is x=p/KH: the larger KH, the less soluble the gas. KH falls in the order Ar (40.3) > CO2 (1.67) > CH4 (0.413) > HCHO (1.83×10−5), so solubility rises as Ar < CO2 < CH4 < HCHO.

Question 17NEET 2021, Q64

The following solutions were prepared by dissolving 10 g of glucose (C6H12O6) in 250 ml of water (P1), 10 g of urea (CH4N2O) in 250 ml of water (P2) and 10 g of sucrose (C12H22O11) in 250 ml of water (P3). The right option for the decreasing order of osmotic pressure of these solutions is:

  1. 1P2>P1>P3
  2. 2P1>P2>P3
  3. 3P2>P3>P1
  4. 4P3>P1>P2
Show answer and solution

Correct: option 1, P2>P1>P3

Osmotic pressure π=CRT depends on the number of moles of solute. With the same mass and volume, moles are inversely proportional to molar mass: urea (60) gives the most moles, then glucose (180), then sucrose (342). So P2>P1>P3.

Question 18NEET 2021, Q93

The correct option for the value of vapour pressure of a solution at 45∘C with benzene to octane in molar ratio 3 : 2 is: [At 45∘C vapour pressure of benzene is 280 mm Hg and that of octane is 420 mm Hg. Assume Ideal gas]

  1. 1160 mm of Hg
  2. 2168 mm of Hg
  3. 3336 mm of Hg
  4. 4350 mm of Hg
Show answer and solution

Correct: option 3, 336 mm of Hg

Mole fractions are 3/5=0.6 for benzene and 2/5=0.4 for octane. By Raoult's law, P=0.6×280+0.4×420=168+168=336 mm of Hg.

Question 19NEET 2020, Q25

The mixture which shows positive deviation from Raoult's law is:

  1. 1Ethanol + Acetone
  2. 2Benzene + Toluene
  3. 3Acetone + Chloroform
  4. 4Chloroethane + Bromoethane
Show answer and solution

Correct: option 1, Ethanol + Acetone

In pure ethanol the molecules are held by hydrogen bonds. Acetone molecules get in between and break some of these bonds, so the molecules escape more easily and the vapour pressure is higher than Raoult's law predicts: positive deviation. Benzene + toluene and chloroethane + bromoethane are nearly ideal, and acetone + chloroform shows negative deviation because the two form a hydrogen bond.

Question 20NEET 2020, Q34

The freezing point depression constant (Kf) of benzene is 5.12 K kg mol−1. The freezing point depression for the solution of molality 0.078 m containing a non-electrolyte solute in benzene is (rounded off upto two decimal places):

  1. 10.20 K
  2. 20.80 K
  3. 30.40 K
  4. 40.60 K
Show answer and solution

Correct: option 3, 0.40 K

For a non-electrolyte, ΔTf=Kf×m=5.12×0.078=0.399 K, which rounds to 0.40 K.

Question 21NEET 2020 Phase 2, Q148

If 8 g of a non-electrolyte solute is dissolved in 114 g of n-octane to reduce its vapour pressure to 80%, the molar mass (in g mol−1) of the solute is [Given that molar mass of n-octane is 114 g mol−1]

  1. 160
  2. 280
  3. 320
  4. 440
Show answer and solution

Correct: option 4, 40

The vapour pressure falls to 80%, so the relative lowering is 0.2. Moles of n-octane =114/114=1. Using the dilute-solution form of Raoult's law, p0−pp0=n2n1, gives n2=0.2 mol and molar mass =8/0.2=40 g mol−1, the keyed option. (With the exact mole fraction n2n1+n2=0.2 one gets n2=0.25 and 32 g mol−1, which is not among the options.)

Question 22NEET 2020 Phase 2, Q174

Isotonic solutions have same

  1. 1freezing temperature
  2. 2osmotic pressure
  3. 3boiling temperature
  4. 4vapour pressure
Show answer and solution

Correct: option 2, osmotic pressure

Isotonic solutions are, by definition, solutions that have the same osmotic pressure at a given temperature, so no net osmosis takes place when a semipermeable membrane separates them.

Question 23NEET 2019, Q66

The mixture that forms maximum boiling azeotrope is:

  1. 1Water + Nitric acid
  2. 2Ethanol + Water
  3. 3Acetone + Carbon disulphide
  4. 4Heptane + Octane
Show answer and solution

Correct: option 1, Water + Nitric acid

A maximum boiling azeotrope comes from a solution with large negative deviation from Raoult's law. Water and nitric acid attract each other strongly and form one (about 68% nitric acid). Ethanol + water and acetone + carbon disulphide show positive deviation (minimum boiling azeotropes), and heptane + octane is nearly ideal.

Question 24NEET 2019, Q70

For an ideal solution, the correct option is:

  1. 1ΔmixS=0 at constant T and P
  2. 2ΔmixV≠0 at constant T and P
  3. 3ΔmixH=0 at constant T and P
  4. 4ΔmixG=0 at constant T and P
Show answer and solution

Correct: option 3, ΔmixH=0 at constant T and P

An ideal solution forms with no heat change and no volume change, so ΔmixH=0 and ΔmixV=0. Mixing is still spontaneous: ΔmixS>0 and ΔmixG<0.

Question 25NEET 2019 Odisha, Q77

Which of the following statements is correct regarding a solution of two components A and B exhibiting positive deviation from ideal behaviour?

  1. 1ΔmixV=0 at constant T and P.
  2. 2Intermolecular attractive forces between A-A and B-B are equal to those between A-B.
  3. 3Intermolecular attractive forces between A-A and B-B are stronger than those between A-B.
  4. 4ΔmixH=0 at constant T and P.
Show answer and solution

Correct: option 3, Intermolecular attractive forces between A-A and B-B are stronger than those between A-B.

A positive deviation from Raoult's law means the vapour pressure is higher than the ideal value. That happens when the A-B attractions are weaker than the A-A and B-B attractions, so molecules escape more easily. For such solutions ΔmixH and ΔmixV are both positive, not zero; options (1), (2) and (4) describe an ideal solution.

Question 26NEET 2017, Q54

If molality of the dilute solution is doubled, the value of molal depression constant (Kf) will be

  1. 1doubled
  2. 2halved
  3. 3tripled
  4. 4unchanged
Show answer and solution

Correct: option 4, unchanged

Kf is a property of the solvent alone (Kf=RTf2M1000 ΔHfus). It does not depend on the concentration of the solution, so it stays unchanged; only ΔTf doubles.

Question 27NEET 2017, Q76

Which of the following is dependent on temperature?

  1. 1Molality
  2. 2Molarity
  3. 3Mole fraction
  4. 4Weight percentage
Show answer and solution

Correct: option 2, Molarity

Molarity is moles of solute per litre of solution, and the volume of a solution changes with temperature. Molality, mole fraction and weight percentage are based only on masses and moles, which do not change with temperature.

Question 28NEET 2016 Phase 1, Q80

Which of the following statements about the composition of the vapour over an ideal 1 : 1 molar mixture of benzene and toluene is correct? Assume that the temperature is constant at 25∘C. (Given, Vapour Pressure Data at 25∘C, benzene = 12.8 kPa, toluene = 3.85 kPa)

  1. 1The vapour will contain a higher percentage of benzene.
  2. 2The vapour will contain a higher percentage of toluene.
  3. 3The vapour will contain equal amounts of benzene and toluene.
  4. 4Not enough information is given to make a prediction.
Show answer and solution

Correct: option 1, The vapour will contain a higher percentage of benzene.

By Raoult's law each partial pressure is mole fraction times pure vapour pressure: benzene 0.5×12.8=6.4 kPa, toluene 0.5×3.85=1.925 kPa. The mole fraction of benzene in the vapour is 6.46.4+1.925≈0.77, so the vapour is richer in benzene, the more volatile component.

Question 29NEET 2016 Phase 1, Q86

At 100∘C the vapour pressure of a solution of 6.5 g of a solute in 100 g water is 732 mm. If Kb=0.52, the boiling point of this solution will be:

  1. 1101∘C
  2. 2100∘C
  3. 3102∘C
  4. 4103∘C
Show answer and solution

Correct: option 1, 101∘C

Pure water has a vapour pressure of 760 mm at 100∘C, so the relative lowering is 760−732760=0.0368, which is the mole fraction of solute. Moles of water =10018=5.56, so moles of solute ≈0.03680.9632×5.56=0.212 in 100 g of water, a molality of about 2.1 mol kg−1. Then ΔTb=Kbm=0.52×2.1≈1.1∘C, and the boiling point is about 101∘C.

Question 30NEET 2016 Phase 2, Q53

The van't Hoff factor (i) for a dilute aqueous solution of the strong electrolyte barium hydroxide is

  1. 10
  2. 21
  3. 32
  4. 43
Show answer and solution

Correct: option 4, 3

A strong electrolyte in dilute solution is fully dissociated: Ba(OH)2→Ba2++2OH−. One formula unit gives 3 ions, so the van't Hoff factor is 3.

Question 31NEET 2016 Phase 2, Q57

Which one of the following is incorrect for ideal solution?

  1. 1ΔHmix=0
  2. 2ΔUmix=0
  3. 3ΔP=Pobs−Pcalculated by Raoult’s law=0
  4. 4ΔGmix=0
Show answer and solution

Correct: option 4, ΔGmix=0

An ideal solution obeys Raoult's law exactly, so there is no deviation in pressure, and mixing involves no heat change or internal energy change. But mixing is spontaneous: the entropy of mixing is positive, so ΔGmix=ΔHmix−TΔSmix=−TΔSmix is negative, not zero. Statement (4) is the incorrect one.

Question 32AIPMT 2015, Q17

Which one of the following electrolytes has the same value of van't Hoff's factor (i) as that of the Al2(SO4)3 (if all are 100% ionised)?

  1. 1K3[Fe(CN)6]
  2. 2Al(NO3)3
  3. 3K4[Fe(CN)6]
  4. 4K2SO4
Show answer and solution

Correct: option 3, K4[Fe(CN)6]

Al2(SO4)3 gives 2 Al3++3 SO42−, five ions, so i=5. K3[Fe(CN)6] gives 4 ions, Al(NO3)3 gives 4, K2SO4 gives 3, and K4[Fe(CN)6] gives 4 K++[Fe(CN)6]4−, five ions. Hence option (3).

Question 33AIPMT 2015, Q34

The boiling point of 0.2 mol kg−1 solution of X in water is greater than equimolal solution of Y in water. Which one of the following statements is true in this case?

  1. 1Molecular mass of X is greater than the molecular mass of Y.
  2. 2Molecular mass of X is less than the molecular mass of Y.
  3. 3Y is undergoing dissociation in water while X undergoes no change.
  4. 4X is undergoing dissociation in water.
Show answer and solution

Correct: option 4, X is undergoing dissociation in water.

ΔTb=iKbm. The solvent and the molality are the same for both solutions, so the larger elevation for X means a larger van't Hoff factor: X gives more particles, that is, it dissociates in water. Molecular mass does not matter once the molality is fixed. Hence option (4).

Question 34AIPMT 2015, Q41

Which one is not equal to zero for an ideal solution:

  1. 1ΔSmix
  2. 2ΔVmix
  3. 3ΔP=Pobserved−PRaoult
  4. 4ΔHmix
Show answer and solution

Correct: option 1, ΔSmix

An ideal solution obeys Raoult's law exactly, so ΔP=0, and it forms with no heat change and no volume change, so ΔHmix=0 and ΔVmix=0. Mixing always increases the disorder, so ΔSmix is positive, not zero. Hence option (1).

Question 35AIPMT 2015 Re-test, Q26

What is the mole fraction of the solute in a 1.00 m aqueous solution?

  1. 10.0354
  2. 20.0177
  3. 30.177
  4. 41.770
Show answer and solution

Correct: option 2, 0.0177

A 1.00 molal solution has 1 mol of solute in 1000 g of water, which is 1000/18=55.5 mol of water. Mole fraction of solute =11+55.5=0.0177, option (2).

Question 36AIPMT 2014, Q161

Of the following 0.10 m aqueous solutions, which one will exhibit the largest freezing point depression?

  1. 1K2SO4
  2. 2KCl
  3. 3C6H12O6
  4. 4Al2(SO4)3
Show answer and solution

Correct: option 4, Al2(SO4)3

ΔTf=iKfm, so at the same molality the solute giving the most particles wins. The van't Hoff factors are: K2SO4 3, KCl 2, glucose 1 and Al2(SO4)3 5 (2Al3++3SO42−). So Al2(SO4)3 gives the largest depression.

Question 37NEET 2013, Q19

6.02×1020 molecules of urea are present in 100 mL of its solution. The concentration of solution is:

  1. 10.01 M
  2. 20.001 M
  3. 30.1 M
  4. 40.02 M
Show answer and solution

Correct: option 1, 0.01 M

Moles of urea =6.02×10206.02×1023=10−3 mol. The volume is 0.1 L, so the molarity is 10−30.1=0.01 M, option (1).

Question 38NEET 2013 Karnataka, Q28

Which condition is not satisfied by an ideal solution?

  1. 1ΔmixV=0
  2. 2ΔmixS=0
  3. 3Obeyance to Raoult's Law
  4. 4ΔmixH=0
Show answer and solution

Correct: option 2, ΔmixS=0

An ideal solution obeys Raoult's law at all compositions and forms with no change in volume or enthalpy. Mixing always increases randomness, though, so ΔmixS is positive, not zero. Condition (2) is the one not satisfied.

Question 39AIPMT 2012 Prelims, Q194

PA and PB are the vapour pressure of pure liquid components, A and B, respectively of an ideal binary solution. If XA represents the mole fraction of component A, the total pressure of the solution will be.

  1. 1PA+XA(PB−PA)
  2. 2PA+XA(PA−PB)
  3. 3PB+XA(PB−PA)
  4. 4PB+XA(PA−PB)
Show answer and solution

Correct: option 4, PB+XA(PA−PB)

By Raoult's law P=PAXA+PBXB, and XB=1−XA. So P=PAXA+PB−PBXA=PB+XA(PA−PB), option (4).

Question 40AIPMT 2012 Mains, Q39

Vapour pressure of chloroform (CHCl3) and dichloromethane (CH2Cl2) at 25°C are 200 mm Hg and 41.5 mm Hg respectively. Vapour pressure of the solution obtained by mixing 25.5 g of CHCl3 and 40 g of CH2Cl2 at the same temperature will be: (Molecular mass of CHCl3 = 119.5 u and molecular mass of CH2Cl2 = 85 u).

  1. 1173.9 mm Hg
  2. 2615.0 mm Hg
  3. 3347.9 mm Hg
  4. 4285.5 mm Hg
Show answer and solution

Correct: option 1, 173.9 mm Hg

The examiners dropped this question and gave every candidate the 4 marks.

Moles of CHCl3=25.5119.5=0.213 and moles of CH2Cl2=4085=0.471, so the mole fractions are 0.312 and 0.688. The law of partial vapour pressures gives P=200×0.312+41.5×0.688≈62.4+28.6≈90.9 mm Hg. This lies between the two pure vapour pressures, as it must, and matches none of the four options, so the key used here marks the question as a bonus (no correct option).

Question 41AIPMT 2011 Prelims, Q16

The freezing point depression constant for water is −1.86 ∘C m−1. If 5.00 g Na2SO4 is dissolved in 45.0 g H2O, the freezing point is changed by −3.82 ∘C. Calculate the van't Hoff factor for Na2SO4.

  1. 12.05
  2. 22.63
  3. 33.11
  4. 40.381
Show answer and solution

Correct: option 2, 2.63

Molality m=5.00/1420.045=0.782 mol/kg (molar mass of Na2SO4 is 142). From ΔTf=iKfm, i=3.821.86×0.782=2.63. It is a little below 3 because the salt is not completely dissociated.

Question 42AIPMT 2011 Prelims, Q27

The van't Hoff factor i for a compound which undergoes dissociation in one solvent and association in other solvent is respectively:

  1. 1less than one and greater than one.
  2. 2less than one and less than one.
  3. 3greater than one and less than one.
  4. 4greater than one and greater than one.
Show answer and solution

Correct: option 3, greater than one and less than one.

The van't Hoff factor is the ratio of the actual number of particles in solution to the number expected without any change. Dissociation increases the number of particles, so i>1; association decreases it, so i<1.

Question 43AIPMT 2011 Prelims, Q31

Mole fraction of the solute in a 1.00 molal aqueous solution is:

  1. 10.1770
  2. 20.0177
  3. 30.0344
  4. 41.7700
Show answer and solution

Correct: option 2, 0.0177

A 1.00 molal solution has 1 mol of solute in 1000 g of water, which is 100018=55.56 mol of water. Mole fraction of solute =11+55.56=0.0177.

Question 44AIPMT 2011 Mains, Q7

A 0.1 molal aqueous solution of a weak acid is 30% ionized. If Kf for water is 1.86∘C/m, the freezing point of the solution will be:

  1. 1−0.18∘C
  2. 2−0.54∘C
  3. 3−0.36∘C
  4. 4−0.24∘C
Show answer and solution

Correct: option 4, −0.24∘C

For HA⇌H++A− with degree of ionisation α=0.3, the van't Hoff factor is i=1+α=1.3. ΔTf=iKfm=1.3×1.86×0.1=0.24∘C. Water freezes at 0∘C, so the solution freezes at −0.24∘C.

Question 45AIPMT 2011 Mains, Q27

200 mL of an aqueous solution of a protein contains its 1.26 g. The Osmotic pressure of this solution at 300 K is found to be 2.57×10−3 bar. The molar mass of protein will be (R=0.083 L bar mol−1 K−1):

  1. 151022 g mol−1
  2. 2122044 g mol−1
  3. 331011 g mol−1
  4. 461038 g mol−1
Show answer and solution

Correct: option 4, 61038 g mol−1

Osmotic pressure π=wMRTV, so M=wRTπV=1.26×0.083×3002.57×10−3×0.200≈61038 g mol−1.

Question 46AIPMT 2010 Prelims, Q70

An aqueous solution is 1.00 molal in KI. Which change will cause the vapour pressure of the solution to increase?

  1. 1Addition of NaCl
  2. 2Addition of Na2SO4
  3. 3Addition of 1.00 molal KI
  4. 4Addition of water
Show answer and solution

Correct: option 4, Addition of water

The vapour pressure of a solution rises with the mole fraction of the solvent. Adding water dilutes the solution, raising the mole fraction of water and so the vapour pressure. Adding NaCl or sodium sulphate puts in more solute particles and lowers it, and adding more 1.00 molal KI leaves the concentration unchanged.

Question 47AIPMT 2010 Prelims, Q71

A solution of sucrose (molar mass = 342 g mol−1) has been prepared by dissolving 68.5 g of sucrose in 1000 g of water. The freezing point of the solution obtained will be: (Kf for water = 1.86 K kg mol−1)

  1. 1−0.372∘C
  2. 2−0.520∘C
  3. 3+0.372∘C
  4. 4−0.570∘C
Show answer and solution

Correct: option 3, +0.372∘C

Molality =68.5342=0.200 mol kg−1, so the depression of freezing point is ΔTf=Kfm=1.86×0.200=0.372 K. The solution therefore freezes 0.372∘C below the freezing point of water, at −0.372∘C, which is option (1). The answer key of the source copy prints (3), which has the same size but the opposite sign; the working does not support it.

Question 48AIPMT 2009 Prelims, Q164

A 0.0020 m aqueous solution of an ionic compound Co(NH3)5(NO2)Cl freezes at −0.00732 ∘C. Number of moles of ions which 1 mol of ionic compound produces on being dissolved in water will be (kf=−1.86 ∘C/m)

  1. 13
  2. 24
  3. 31
  4. 42
Show answer and solution

Correct: option 4, 2

ΔTf=i Kf m, so i=0.007321.86×0.0020≈1.97≈2. The compound therefore gives two ions, [Co(NH3)5(NO2)]+ and Cl−.

Question 49AIPMT 2007 Prelims, Q110

0.5 molal aqueous solution of a weak acid (HX) is 20% ionized. If Kf for water is 1.86 K kg mol−1, the lowering in freezing point of the solution is

  1. 1−0.56 K
  2. 2−1.12 K
  3. 30.56 K
  4. 41.12 K
Show answer and solution

Correct: option 4, 1.12 K

HX gives two ions, so the van't Hoff factor is i=1+α=1+0.20=1.2. ΔTf=iKfm=1.2×1.86×0.5=1.12 K. A lowering is quoted as a positive amount.

Question 50AIPMT 2006 Prelims, Q52

A solution containing 10 g per dm3 of urea (molecular mass = 60 g mol−1) is isotonic with a 5% solution of a nonvolatile solute. The molecular mass of this nonvolatile solution is:

  1. 1250 g mol−1
  2. 2300 g mol−1
  3. 3350 g mol−1
  4. 4200 g mol−1
Show answer and solution

Correct: option 2, 300 g mol−1

Isotonic solutions at the same temperature have the same molar concentration. Urea: 10/60=1/6 mol dm−3. A 5% solution holds 50 g of solute per dm3, so 50/M=1/6, which gives M=300 g mol−1.

Question 51AIPMT 2006 Prelims, Q81

1.00 g of a non-electrolyte solute (molar mass 250 g mol−1) was dissolved in 51.2 g of benzene. If the freezing point depression constant Kf of benzene is 5.12 K kg mol−1, the freezing point of benzene will be lowered by:

  1. 10.4 K
  2. 20.3 K
  3. 30.5 K
  4. 40.2 K
Show answer and solution

Correct: option 1, 0.4 K

Molality =1.00/2500.0512 kg=0.0781 mol kg−1. ΔTf=Kfm=5.12×0.0781=0.4 K.

Question 52AIPMT 2006 Prelims, Q84

A solution of acetone in ethanol:

  1. 1Shows a negative deviation from Raoult's law
  2. 2Shows a positive deviation from Raoult's law
  3. 3Behaves like a near ideal solution
  4. 4Obeys Raoult's law
Show answer and solution

Correct: option 2, Shows a positive deviation from Raoult's law

Ethanol molecules are held together by hydrogen bonds. Acetone molecules get between them and break some of these bonds, so the attractions in the mixture are weaker than in the pure liquids. Molecules escape more easily, the vapour pressure is higher than Raoult's law predicts, and the deviation is positive.

Question 53AIPMT 2006 Prelims, Q87

During osmosis, flow of water through a semipermeable membrane is:

  1. 1From solution having higher concentration only
  2. 2From both sides of semipermeable membrane with equal flow rates
  3. 3From both sides of semipermeable membrane with unequal flow rates
  4. 4From solution having lower concentration only
Show answer and solution

Correct: option 3, From both sides of semipermeable membrane with unequal flow rates

Solvent molecules cross the membrane in both directions all the time. More of them pass from the dilute side to the concentrated side than the other way, and this difference in the two rates is the net flow seen as osmosis.

Question 54AIPMT 2005 Prelims, Q60

The mole fraction of the solute in one molal aqueous solution is:-

  1. 10.027
  2. 20.036
  3. 30.018
  4. 40.009
Show answer and solution

Correct: option 3, 0.018

One molal means 1 mol of solute in 1000 g of water, which is 1000/18=55.56 mol of water. Mole fraction of solute =11+55.56=0.0177≈0.018.

Question 55AIPMT 2005 Prelims, Q63

The vapour pressure of two liquids 'P' and 'Q' are 80 and 60 torr, respectively. The total vapour pressure of solution obtained by mixing 3 mole of P and 2 mole of Q would be:-

  1. 168 torr
  2. 2140 torr
  3. 372 torr
  4. 420 torr
Show answer and solution

Correct: option 3, 72 torr

Mole fractions are xP=3/5=0.6 and xQ=2/5=0.4. By Raoult's law, ptotal=0.6×80+0.4×60=48+24=72 torr.

Question 56AIPMT 2005 Prelims, Q67

A solution of urea (mol. mass 56 g mol−1) boils at 100.18°C at the atmospheric pressure. If Kf and Kb for water are 1.86 and 0.512 K kg mol−1 respectively, the above solution will freeze at:-

  1. 1–6.54°C
  2. 2–0.654°C
  3. 36.54°C
  4. 40.654°C
Show answer and solution

Correct: option 2, –0.654°C

Both changes depend on the same molality, so ΔTfΔTb=KfKb. With ΔTb=0.18, ΔTf=0.18×1.860.512=0.654. The freezing point is lowered, so the solution freezes at –0.654°C. The molar mass is not needed.

Question 57AIPMT 2005 Prelims, Q75

A solution has a 1:4 mole ratio of pentane to hexane. The vapour pressures of the pure hydrocarbons at 20°C are 440 mm Hg for pentane and 120 mm Hg for hexane. The mole fraction of pentane in the vapour phase would be-

  1. 10.200
  2. 20.478
  3. 30.549
  4. 40.786
Show answer and solution

Correct: option 2, 0.478

In the liquid xpentane=1/5=0.2 and xhexane=0.8. Partial pressures are 0.2×440=88 mm Hg and 0.8×120=96 mm Hg, a total of 184 mm Hg. By Dalton's law the mole fraction of pentane in the vapour is 88/184=0.478.

Question 58AIPMT 2004 Prelims, Q67

Camphor is often used in molecular mass determination because:

  1. 1It has a very high cryoscopic constant
  2. 2It is volatile
  3. 3It is solvent for organic substances
  4. 4It is readily available
Show answer and solution

Correct: option 1, It has a very high cryoscopic constant

Molar mass is found from the depression of freezing point, ΔTf=Kfm. Camphor has a very large cryoscopic constant Kf (about 40 K kg mol−1), so even a little solute lowers its melting point by an amount that is easy to measure accurately (Rast method).

Question 59AIPMT 2003 Prelims, Q68

Formation of a solution from two components can be considered as: (i) Pure solvent → separated solvent molecules, ΔH1 (ii) Pure solvent → separated solvent molecules, ΔH2 (iii) Separated solvent and solute molecules → solution, ΔH3 Solution so formed will be ideal if: -

  1. 1ΔHSoln=ΔH1+ΔH2+ΔH3
  2. 2ΔHSoln=ΔH1+ΔH2−ΔH3
  3. 3ΔHSoln=ΔH1−ΔH2−ΔH3
  4. 4ΔHSoln=ΔH3−ΔH1−ΔH2
Show answer and solution

Correct: option 1, ΔHSoln=ΔH1+ΔH2+ΔH3

Step (ii) is meant to be the separation of the solute molecules. By Hess's law the enthalpy of solution is the sum of the three steps, ΔHSoln=ΔH1+ΔH2+ΔH3. For an ideal solution the energy spent separating the molecules (ΔH1+ΔH2) is exactly returned on mixing (ΔH3), so this sum is zero; option (1) is the only one that writes the sum correctly.

Question 60AIPMT 2002 Prelims, Q66

A solution contains non volatile solute of molecular mass M2. Which of the following can be used to calculate the molecular mass of solute in terms of osmotic pressure: Note: m2→ mass of solute V→ Volume of solution π→ Osmotic pressure

  1. 1M2=(m2π)VRT
  2. 2M2=(m2V)RTπ
  3. 3M2=(m2V)πRT
  4. 4M2=(m2V)πRT
Show answer and solution

Correct: option 2, M2=(m2V)RTπ

Osmotic pressure is π=CRT with C=nV=m2M2V. So π=m2RTM2V, and rearranging gives M2=(m2V)RTπ.

Question 61AIPMT 2002 Prelims, Q67

A solution containing components A and B follows Raoult's law:

  1. 1A – B attraction force is greater than A – A and B – B
  2. 2A – B attraction force is less than A – A and B – B
  3. 3Attraction force remains same in A – A and B – B
  4. 4Volume of solution is different from sum of volume of solute and solvent
Show answer and solution

Correct: option 3, Attraction force remains same in A – A and B – B

A solution that obeys Raoult's law is ideal: the A–B attraction is the same as the A–A and B–B attractions, so mixing causes no heat change and no volume change. Stronger A–B attraction gives a negative deviation, weaker gives a positive deviation, and a volume change also means the solution is not ideal.

Question 62AIPMT 2001 Prelims, Q77

Pure water can be obtain from sea water by

  1. 1Centrifugation
  2. 2Plasmolysis
  3. 3Reverse osmosis
  4. 4Sedimentation
Show answer and solution

Correct: option 3, Reverse osmosis

When a pressure greater than the osmotic pressure is applied to sea water across a semipermeable membrane, water flows from the salt solution to the pure side. This reverse osmosis is used for desalination. The other methods cannot remove dissolved salts.

Question 63AIPMT 2000 Prelims, Q96

From the colligative properties of solution which one is the best method for the determination of mol. wt of proteins & polymers:

  1. 1Osmotic pressure
  2. 2Lowering in V.P.
  3. 3Lowering is freezing point
  4. 4Elevation in B.Pt.
Show answer and solution

Correct: option 1, Osmotic pressure

Proteins and polymers have very high molar masses, so even a concentrated solution contains very few moles and the changes in vapour pressure, freezing point and boiling point are too small to measure. Osmotic pressure is large enough to measure even for very dilute solutions, and it is measured at room temperature, so the molecules are not damaged by heating.

Question 64AIPMT 1999 Prelims, Q91

What is false for mole fraction:

  1. 1x<1
  2. 2−2≤x≤2
  3. 30≤x≤1
  4. 4Always non-negative
Show answer and solution

Correct: option 2, −2≤x≤2

A mole fraction is the moles of one component divided by the total moles, so it always lies between 0 and 1 and can never be negative or greater than 1. The statement that it can range from –2 to 2 is therefore false.

Question 65AIPMT 1998 Prelims, Q79

1% solution of other compound is isotonic with 5% sucrose (sugar) solution. Then molecular wt. of compound will be:

  1. 132.4
  2. 268.4
  3. 3129.6
  4. 434.2
Show answer and solution

Correct: option 2, 68.4

Isotonic solutions at the same temperature have the same molar concentration. For the same volume of solution, 1M=5342, where 342 is the molar mass of sucrose. So M=342/5=68.4.

Question 66AIPMT 1998 Prelims, Q92

Mole fraction of solute is 0.2 in solution then lowering in V.P ΔP=10. If lowering in V.P. ΔP=20 then mole fraction of solvent will be in solution:

  1. 10.2
  2. 20.4
  3. 30.6
  4. 40.8
Show answer and solution

Correct: option 3, 0.6

By Raoult's law the lowering of vapour pressure is proportional to the mole fraction of the solute: ΔP=P∘xsolute. Doubling ΔP from 10 to 20 doubles the mole fraction of solute from 0.2 to 0.4. The mole fraction of solvent is then 1−0.4=0.6.