NEET Chemistry

General Principles and Processes of Isolation of Elements

28
questions
28
from past papers
28 min
chapter test

Questions with solutions

Question 1NEET 2023, Q100

The reaction that does NOT take place in a blast furnace between 900 K to 1500 K temperature range during extraction of iron is:

  1. 1Fe2O3+CO→2FeO+CO2
  2. 2FeO+CO→Fe+CO2
  3. 3C+CO2→2CO
  4. 4CaO+SiO2→CaSiO3
Show answer and solution

Correct: option 1, Fe2O3+CO→2FeO+CO2

The reduction of Fe2O3 to FeO by CO takes place in the cooler upper part of the furnace, at 500 to 800 K. The reactions in the 900 to 1500 K range are the formation of CO from carbon and CO2, the reduction of FeO to Fe, and slag formation. So reaction (1) does not belong to this range.

Question 2NEET 2023 Manipur, Q96

Read the following statements and choose the set of correct statements: (A) Chrome steel is used for cutting tools and crushing machines. (B) The fine dust of aluminium is used in paints and lacquers. (C) Copper is used for reduction of alcohol. (D) Zinc dust is used as a reducing agent in the manufacture of paints. (E) Iron is used for galvanising zinc. Choose the most appropriate answer from the options given below:

  1. 1(A), (B) and (D) only
  2. 2(B), (C) and (D) only
  3. 3(D) and (E) only
  4. 4(A) and (D) only
Show answer and solution

Correct: option 1, (A), (B) and (D) only

Chrome steel is used for cutting tools and crushing machines, aluminium dust goes into paints and lacquers, and zinc dust is a reducing agent in making dye-stuffs and paints, so (A), (B) and (D) are correct. Hot copper oxidises (dehydrogenates) alcohols, it does not reduce them, so (C) is wrong. In galvanising, zinc is coated on iron, not the reverse, so (E) is wrong.

Question 3NEET 2022, Q92

Match List-I with List-II.

List-I (Ores)List-II (Composition)
(a) Haematite(i) Fe3O4
(b) Magnetite(ii) ZnCO3
(c) Calamine(iii) Fe2O3
(d) Kaolinite(iv) [Al2(OH)4Si2O5]

Choose the correct answer from the options given below:

  1. 1a-i, b-iii, c-ii, d-iv
  2. 2a-i, b-ii, c-iii, d-iv
  3. 3a-iii, b-i, c-ii, d-iv
  4. 4a-iii, b-i, c-iv, d-ii
Show answer and solution

Correct: option 3, a-iii, b-i, c-ii, d-iv

Haematite is Fe2O3 (iii), magnetite is Fe3O4 (i), calamine is the zinc ore ZnCO3 (ii) and kaolinite is the clay [Al2(OH)4Si2O5] (iv). So a-iii, b-i, c-ii, d-iv.

Question 4NEET 2022 Re-exam, Q96

Which one of the following is not a calcination reaction?

  1. 1CaCO3+2HCl→ΔCaCl2+H2O+CO2
  2. 2ZnCO3→ΔZnO+CO2
  3. 3Fe2O3⋅xH2O→ΔFe2O3+xH2O
  4. 4CaCO3⋅MgCO3→ΔCaO+MgO+2CO2
Show answer and solution

Correct: option 1, CaCO3+2HCl→ΔCaCl2+H2O+CO2

Calcination is the heating of an ore on its own, with little or no air, to drive off volatile matter such as water or CO2 and leave the oxide. Reactions (2), (3) and (4) are of this kind. Reaction (1) is the reaction of a carbonate with an acid, not a thermal decomposition of the ore.

Question 5NEET 2021, Q65

Which one of the following methods can be used to obtain highly pure metal which is liquid at room temperature?

  1. 1Electrolysis
  2. 2Chromatography
  3. 3Distillation
  4. 4Zone refining
Show answer and solution

Correct: option 3, Distillation

The metal that is liquid at room temperature is mercury. It has a low boiling point, so it is purified by distillation: the mercury vaporises and is condensed, leaving the high-boiling impurities behind.

Question 6NEET 2021, Q69

The maximum temperature that can be achieved in blast furnace is:

  1. 1upto 1200 K
  2. 2upto 2200 K
  3. 3upto 1900 K
  4. 4upto 5000 K
Show answer and solution

Correct: option 2, upto 2200 K

In the blast furnace, coke burns in the hot air blast near the bottom and raises the temperature there to about 2200 K, the highest in the furnace. The temperature falls towards the top.

Question 7NEET 2020, Q44

Identify the correct statement from the following:

  1. 1Wrought iron is impure iron with 4% carbon.
  2. 2Blister copper has blistered appearance due to evolution of CO2.
  3. 3Vapour phase refining is carried out for Nickel by Van Arkel method.
  4. 4Pig iron can be moulded into a variety of shapes.
Show answer and solution

Correct: option 4, Pig iron can be moulded into a variety of shapes.

Pig iron can be cast into a variety of shapes, so (4) is correct. Wrought iron is the purest form of commercial iron; it is pig iron that has about 4% carbon. Blister copper gets its blisters from escaping SO2. Nickel is refined by the Mond process; the Van Arkel method is for zirconium and titanium.

Question 8NEET 2020 Phase 2, Q172

Match the elements in Column I with methods of purification in Column II.

Column IColumn II
(a) Boron(i) Van Arkel method
(b) Tin(ii) Mond's process
(c) Zirconium(iii) Liquation
(d) Nickel(iv) Zone refining
  1. 1a-iv, b-iii, c-ii, d-i
  2. 2a-ii, b-i, c-iv, d-iii
  3. 3a-iii, b-iv, c-i, d-ii
  4. 4a-iv, b-iii, c-i, d-ii
Show answer and solution

Correct: option 4, a-iv, b-iii, c-i, d-ii

Boron, like silicon and germanium, is obtained very pure by zone refining (a-iv). Tin has a low melting point and is run off from its impurities by liquation (b-iii). Zirconium is purified by the van Arkel method through its volatile iodide ZrI4 (c-i). Nickel is purified by Mond's process through volatile Ni(CO)4 (d-ii).

Question 9NEET 2019, Q89

Which one is malachite from the following?

  1. 1CuFeS2
  2. 2Cu(OH)2
  3. 3Fe3O4
  4. 4CuCO3.Cu(OH)2
Show answer and solution

Correct: option 4, CuCO3.Cu(OH)2

Malachite is the basic carbonate ore of copper, CuCO3.Cu(OH)2. CuFeS2 is copper pyrites and Fe3O4 is magnetite.

Question 10NEET 2019 Odisha, Q51

Identify the incorrect statement.

  1. 1Ores are minerals that may contain a metal.
  2. 2Gangue is an ore contaminated with undesired materials.
  3. 3The scientific and technological process used for isolation of the metal from its ore is known as metallurgy.
  4. 4Minerals are naturally occurring chemical substances in the earth's crust.
Show answer and solution

Correct: option 2, Gangue is an ore contaminated with undesired materials.

Gangue is not an ore. It is the unwanted earthy or rocky material (sand, clay and so on) that comes mixed with the ore. The other three statements describe minerals, ores and metallurgy acceptably, so statement (2) is the incorrect one.

Question 11NEET 2018, Q48

Considering Ellingham diagram, which of the following metals can be used to reduce alumina?

  1. 1Mg
  2. 2Zn
  3. 3Fe
  4. 4Cu
Show answer and solution

Correct: option 1, Mg

A metal can reduce the oxide of another metal only if its own oxide line lies lower in the Ellingham diagram (more negative ΔG∘ of formation). Of the four, only the MgO line lies below the Al2O3 line (below about 1350 °C), so Mg can reduce alumina.

Question 12NEET 2017, Q90

Extraction of gold and silver involves leaching with CN− ion. Silver is later recovered by:

  1. 1liquation
  2. 2distillation
  3. 3zone refining
  4. 4displacement with Zn
Show answer and solution

Correct: option 4, displacement with Zn

Leaching gives the soluble complex [Ag(CN)2]−. Zinc is more reactive and displaces silver from it: 2[Ag(CN)2]−+Zn→[Zn(CN)4]2−+2Ag.

Question 13NEET 2016 Phase 1, Q58

Match items of Column I with the items of Column II and assign the correct code:

Column IColumn II
(a) Cyanide process(i) Ultrapure Ge
(b) Froth floatation process(ii) Dressing of ZnS
(c) Electrolytic reduction(iii) Extraction of Al
(d) Zone refining(iv) Extraction of Au
(v) Purification of Ni
  1. 1a-iv, b-ii, c-iii, d-i
  2. 2a-ii, b-iii, c-i, d-v
  3. 3a-i, b-ii, c-iii, d-iv
  4. 4a-iii, b-iv, c-v, d-i
Show answer and solution

Correct: option 1, a-iv, b-ii, c-iii, d-i

Gold is leached from its ore with dilute cyanide solution (a-iv). Froth floatation concentrates sulphide ores such as ZnS (b-ii). Aluminium is obtained by electrolytic reduction of alumina in the Hall-Heroult process (c-iii). Zone refining gives very pure semiconductors such as germanium (d-i). Purification of nickel is done by the Mond process, which is not in Column I.

Question 14AIPMT 2015, Q5

"Metals are usually not found as nitrates in their ores". Out of the following two (a and b) reasons which is/are true for the above observation? (a) Metal nitrates are highly unstable. (b) Metal nitrates are highly soluble in water.

  1. 1a and b are false
  2. 2a is false but b is true
  3. 3a is true but b is false
  4. 4a and b are true
Show answer and solution

Correct: option 2, a is false but b is true

Nitrates such as NaNO3 and KNO3 are quite stable solids, so reason (a) is false. Almost all metal nitrates dissolve readily in water, so they are washed away by rain and do not collect as ore deposits; reason (b) is true. Hence option (2).

Question 15AIPMT 2015 Re-test, Q45

In the extraction of copper from its sulphide ore, the metal is finally obtained by the reduction of cuprous oxide with:

  1. 1copper(I) sulphide
  2. 2sulphur dioxide
  3. 3iron(II) sulphide
  4. 4carbon monoxide
Show answer and solution

Correct: option 2, sulphur dioxide

In the Bessemer converter part of the copper matte is oxidised to cuprous oxide, which then reacts with the remaining sulphide (self-reduction): 2Cu2O+Cu2S→6Cu+SO2. The answer key used for this paper gives option (2), sulphur dioxide, which is the gas given off in this step. Note that in this equation the substance that reduces Cu2O is copper(I) sulphide, option (1), so the key is open to doubt here.

Question 16NEET 2013 Karnataka, Q4

The metal oxide which cannot be reduced to metal by carbon is:

  1. 1Al2O3
  2. 2PbO
  3. 3ZnO
  4. 4Fe2O3
Show answer and solution

Correct: option 1, Al2O3

Aluminium has a much greater affinity for oxygen than carbon has at workable temperatures (its line lies very low in the Ellingham diagram), so Al2O3 is not reduced by carbon and aluminium is obtained by electrolysis. PbO, ZnO and Fe2O3 are all reduced by carbon or CO.

Question 17AIPMT 2012 Prelims, Q151

Aluminium is extracted from alumina (Al2O3) by electrolysis of a molten mixture of:

  1. 1Al2O3+HF+NaAlF4
  2. 2Al2O3+CaF2+NaAlF4
  3. 3Al2O3+Na3AlF6+CaF2
  4. 4Al2O3+KF+Na3AlF6
Show answer and solution

Correct: option 3, Al2O3+Na3AlF6+CaF2

In the Hall-Heroult process purified alumina is dissolved in molten cryolite, Na3AlF6, with some fluorspar, CaF2. These lower the melting point of the mixture and make it a better conductor, so the electrolyte is Al2O3+Na3AlF6+CaF2, option (3).

Question 18AIPMT 2012 Prelims, Q158

Which one of the following is a mineral of iron?

  1. 1Malachite
  2. 2Cassiterite
  3. 3Pyrolusite
  4. 4Magnetite
Show answer and solution

Correct: option 4, Magnetite

Magnetite is Fe3O4, an ore of iron. Malachite, CuCO3⋅Cu(OH)2, is a copper mineral, cassiterite, SnO2, a tin mineral and pyrolusite, MnO2, a manganese mineral. So option (4).

Question 19AIPMT 2012 Prelims, Q181

In the extraction of copper from its sulphide ore, the metal is finally obtained by the reduction of cuprous oxide with:

  1. 1Copper (I) sulphide (Cu2S)
  2. 2Sulphur dioxide (SO2)
  3. 3Iron sulphide (FeS)
  4. 4Carbon monoxide (CO)
Show answer and solution

Correct: option 1, Copper (I) sulphide (Cu2S)

In the Bessemer converter part of the Cu2S is oxidised to Cu2O, which then reacts with the remaining sulphide: 2Cu2O+Cu2S→6Cu+SO2 (auto-reduction). The reducing agent is copper(I) sulphide, option (1).

Question 20AIPMT 2012 Prelims, Q182

Identify the alloy containing a non-metal as a constituent in it.

  1. 1Invar
  2. 2Steel
  3. 3Bell metal
  4. 4Bronze
Show answer and solution

Correct: option 2, Steel

Steel is iron alloyed with a small amount of carbon, a non-metal. Invar is iron with nickel, and bell metal and bronze are copper with tin: all metals. So option (2).

Question 21AIPMT 2011 Prelims, Q34

Which of the following elements is present as the impurity to the maximum extent in the pig iron?

  1. 1Manganese
  2. 2Carbon
  3. 3Silicon
  4. 4Phosphorus
Show answer and solution

Correct: option 2, Carbon

Pig iron from the blast furnace contains about 4% carbon, picked up from the coke, along with much smaller amounts of sulphur, phosphorus, silicon and manganese. Carbon is therefore the main impurity.

Question 22AIPMT 2011 Prelims, Q46

Which of the following pairs of metals is purified by van Arkel method?

  1. 1Ga and In
  2. 2Zr and Ti
  3. 3Ag and Au
  4. 4Ni and Fe
Show answer and solution

Correct: option 2, Zr and Ti

In the van Arkel method the impure metal is heated with iodine to form a volatile tetraiodide (ZrI4 or TiI4), which is then decomposed on a hot tungsten filament to deposit the ultra-pure metal. It is used for zirconium and titanium.

Question 23AIPMT 2011 Mains, Q29

The following reactions take place in the blast furnace in the preparation of impure iron. Identify the reaction pertaining to the formation of the slag.

  1. 1Fe2O3(s)+3CO(g)→2Fe(l)+3CO2(g)
  2. 2CaCO3(s)→CaO(s)+CO2(g)
  3. 3CaO(s)+SiO2(s)→CaSiO3(s)
  4. 42C(s)+O2(g)→2CO(g)
Show answer and solution

Correct: option 3, CaO(s)+SiO2(s)→CaSiO3(s)

Slag is the fusible product formed when the flux combines with the gangue. In the blast furnace the basic flux CaO (from limestone) combines with the acidic impurity silica to give calcium silicate, CaSiO3, which is the slag. The other reactions are the reduction of the ore, the decomposition of limestone and the burning of coke.

Question 24AIPMT 2007 Prelims, Q124

Which of the following statements, about the advantage of roasting sulphide ore before reduction is not true?

  1. 1Roasting of the sulphide to the oxide is thermodynamically feasible.
  2. 2Carbon and hydrogen are suitable reducing agents for metal sulphides.
  3. 3The ΔfG⊖ of the sulphide is greater than those for CS2 and H2S
  4. 4The ΔfG⊖ is negative for roasting of sulphide ore to oxide
Show answer and solution

Correct: option 2, Carbon and hydrogen are suitable reducing agents for metal sulphides.

Metal sulphides are more stable than CS2 and H2S, so carbon and hydrogen cannot reduce a sulphide directly; the statement that they are suitable reducing agents for sulphides is the false one. This is exactly why the ore is first roasted to the oxide, a change with negative ΔG, and the oxide is then reduced.

Question 25AIPMT 2007 Prelims, Q126

Sulphides ores of metals are usually concentrated by Froth Flotation process. Which one of the following sulphides ores offers an exception and is concentrated by chemical leaching?

  1. 1Sphalerite
  2. 2Argentite
  3. 3Galena
  4. 4Copper pyrite
Show answer and solution

Correct: option 2, Argentite

Argentite, Ag2S, is the ore of silver. It is concentrated by leaching with a dilute sodium cyanide solution in air, which dissolves the silver as the complex Na[Ag(CN)2]. Sphalerite (ZnS), galena (PbS) and copper pyrite (CuFeS2) are concentrated by froth flotation.

Question 26AIPMT 2005 Prelims, Q64

The mass of carbon anode consumed (giving only carbondioxide) in the production of 270 kg of aluminium metal from bauxite by the Hall process is:- (Atomic mass: Al = 27)

  1. 190 kg
  2. 2540 kg
  3. 3180 kg
  4. 4270 kg
Show answer and solution

Correct: option 1, 90 kg

The overall cell reaction is 2Al2O3+3C→4Al+3CO2, so 4 mol of Al (108 g) uses 3 mol of C (36 g). For 270 kg of Al the carbon used is 270×36108=90 kg.

Question 27AIPMT 2003 Prelims, Q64

The method of zone refining of metals is based on the principle of:

  1. 1Greater mobility of the pure metal than that of the impurity
  2. 2Higher melting point of the impurity than that of the pure metal
  3. 3Greater noble character of the solid metal than that of the impurity
  4. 4Greater solubility of the impurity in the molten state than in the solid
Show answer and solution

Correct: option 4, Greater solubility of the impurity in the molten state than in the solid

In zone refining a narrow molten zone is moved along a rod of the metal. Impurities are more soluble in the melt than in the solid, so they stay in the molten zone and are swept to one end, while pure metal crystallises behind the zone.

Question 28AIPMT 1998 Prelims, Q83

Maximum impurity in Pig iron will be of:

  1. 1Mn
  2. 2P
  3. 3Graphite
  4. 4S
Show answer and solution

Correct: option 3, Graphite

Pig iron from the blast furnace contains about 4% carbon, present as graphite or as iron carbide, and only smaller amounts of Si, Mn, P and S. Carbon (graphite) is therefore the main impurity.