Topic 1

What a wire's resistance depends on

Before you start

You need the idea that a current I is a flow of charge, measured in amperes, A, and that a potential difference V, in volts, is what drives it. Wires joining parts of a circuit are taken to have no resistance unless the question says otherwise.

For a metal wire at a steady temperature, the current is proportional to the potential difference across it. The ratio V / I is its resistance R, measured in ohms, Ω. This is Ohm's law.

V = I R

V across the wire, I through it

A longer wire resists more, and a thicker one resists less. The material sets the resistivity ρ, in Ω m. Resistivity depends on the material and the temperature, not on the wire's shape.

R = ρ L / A

L is the length and A the cross-sectional area

Predict first

A wire is stretched to twice its original length. Its volume stays the same. What happens to its resistance?

Stretch the wire, keeping its volume

original: 2 Ω
length
× 1
area
÷ 1
R = ρ L / A
2 Ω

The picture shows the wire from the side, so its thickness stands for the area. Length up n times and area down n times make R go up n² times.

Stretching a wire n times its length multiplies its resistance by n². A 2 Ω wire stretched to three times its length becomes 2 × 9 = 18 Ω.