Topic 2

Potential across a uniform field

Between two large parallel plates the field is the same everywhere: a uniform field. Going along the field, the potential drops steadily. The field points from high potential to low potential.

E = V / d

V is the potential difference between the plates and d the gap between them; E comes out in V/m, the same as N/C

Predict first

Two plates 5 cm apart are held at 0 V and 100 V. What is the potential at a point 2 cm from the 0 V plate?

Move the point between the plates

0 V100 V20 V40 V60 V80 Vfield E points from 100 V to 0 V
field E = V / d
2000 V/m
distance x
1 cm
potential = E x
20 V
work to bring +1 μC here
20 μJ

The dashed lines are equipotentials, one every centimetre. The field is the same at every point; only the potential changes.

Moving a charge q through a potential difference ΔV takes work W = q ΔV, where ΔV is the potential at the end minus the potential at the start. Carrying 2 μC from the 0 V plate to the 40 V point needs 2 × 10⁻⁶ × 40 = 8 × 10⁻⁵ J. Only the start and end potentials matter, not the path.

Equipotential surfaces

A surface where the potential is the same everywhere is an **equipotential**. Here they are flat sheets parallel to the plates; around a point charge they are spheres. Field lines always cross them at right angles, and moving a charge along one takes **no work**.