Topic 2
A changing flux makes an emf
A steady flux does nothing. When the flux through a coil changes, an emf appears in the coil. This is Faraday's law. It does not matter whether the field changes, the area changes, or the coil turns: only the rate of change of flux counts.
Each turn of a coil adds the same emf, so a coil of N turns gives N times as much. N Φ is called the flux linkage.
ε = −N ΔΦ / Δt
ε is the emf, ΔΦ the change of flux through one turn, Δt the time it takes
Predict first
A coil of 100 turns and area 0.02 m² faces a 0.5 T field squarely. The field is switched off evenly in 0.1 s. What is the average emf in the coil?
Change how quickly the flux falls
- time Δt
- 0.2 s
- change N ΔΦ
- 0.5 Wb
- emf = N ΔΦ / Δt
- 2.5 V
50 turns, 0.01 Wb through each. The total change is always 0.5 Wb; only its speed changes. Halve the time and the line gets twice as steep, so the emf doubles.
The same change of flux made faster gives a bigger emf. On a graph of flux linkage against time, the emf is the steepness of the line.