Topic 2
How g changes above and below the surface
At the surface, g comes from the whole Earth pulling on you. Its value is linked to the Earth's mass M and radius R by g = G M / R². Move away from the centre and this pull changes, in two different ways depending on which way you go.
Predict first
Taking g = 10 m/s² at the surface, at what height above the surface does g fall to 2.5 m/s²? R is the Earth's radius.
Going up, you move away from all of the Earth's mass, so the inverse-square law applies with the distance R + h from the centre, where h is the height.
g′ = g R² / (R + h)²
g′ is the value at height h; close to the surface (h much less than R) it is about g (1 − 2h/R)
Going down a mine, the shell of rock above you no longer pulls you inwards overall. Only the part of the Earth below you counts, and g falls in a straight line to zero at the centre. This assumes the Earth has the same density all through, as NEET questions do.
g′ = g (1 − d / R)
g′ is the value at depth d below the surface
Move from the centre of the Earth outwards
- from the centre
- 1.5 R
- position
- height 0.5 R
- g
- 4.44 m/s²
Inside, g rises in a straight line from zero. Outside, it falls as 1 / r². At depth R/2 it is 5 m/s²; at height R it is 2.5 m/s².
Measure from the right place
Height and depth are measured from the surface, but the inverse-square law uses the distance from the centre. Most wrong answers here come from mixing the two.