Topic 3

Four standard processes

Most NEET questions use one of four processes. In each, one thing is held fixed, and that makes one term of the first law simple.

Pick a process

VPAisothermal

Temperature stays constant: ΔU = 0

Q = W

All the heat taken in leaves again as work.

Compare the isothermal and adiabatic curves: from the same point A, the adiabatic one falls more steeply.

Predict first

A gas expands adiabatically, which means no heat enters or leaves it, and does 150 J of work. What happens to its internal energy?

Isothermal: T fixed, so ΔU = 0 and Q = W. Adiabatic: no heat, so Q = 0 and ΔU = −W. Isochoric: V fixed, so W = 0 and Q = ΔU. Isobaric: P fixed, so W = P ΔV.

isothermal: P V = constant adiabatic: P Vᵞ = constant

γ = Cₚ / Cᵥ, the ratio of the two molar heat capacities, is greater than 1

Both curves slope down, but because γ is greater than 1 the adiabatic curve is steeper. From the same starting point, an adiabatic expansion ends at a lower pressure than an isothermal one, because the gas also cools.