Topic 1

Solids grow when they are heated

Before you start

You need temperature in °C and in kelvin. A change of 1 °C is the same size as a change of 1 K, so for a rise or fall in temperature the two scales give the same number.

Heat a metal rod and its atoms vibrate harder and sit a little further apart. The whole rod gets longer. The change is small, but rails, bridges and pipes are built with gaps to allow for it.

Heat a steel rod

+1.2 mmL = 2 m
rise ΔT
50 °C
extra length = α L ΔT
1.2 mm
new length
2.0012 m

The orange piece is drawn hugely enlarged. Double the length or double the rise and the extra length doubles. α for steel is taken as 1.2 × 10⁻⁵ per °C.

Predict first

A steel rod 2 m long is heated from 20 °C to 70 °C. Steel expands by 1.2 × 10⁻⁵ of its length for every degree. How much longer does the rod get?

The extra length is proportional to the starting length and to the rise in temperature. The constant α is the coefficient of linear expansion. Its unit is per °C, or per K.

ΔL = α L ΔT

L: starting length; ΔT: rise in temperature; ΔL: extra length

Area and volume grow too. For a solid that expands equally in every direction, the area coefficient is β = 2α and the volume coefficient is γ = 3α. A hole in a metal plate gets bigger when the plate is heated, as if the hole were made of the metal.